1 rf driver amplifier 250 - 3000 mhz rev. v1 maam-009563 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. 1. reference application note m513 for reel size information. 2. sample board includes 5 loose parts. features ? oip3: 47 dbm ? broadband operation ? high efficiency ? class 2 esd rating ? lead-free soic-8ep package ? halogen-free ?green? mold compound ? rohs* compliant and 260c reflow compatible description the maam-009563 rf driver amplifier is a two stage gaas mmic which exhi bits exceptional linear- ity performance as well as featuring high gain in a lead-free soic-8ep surface mount plastic package. the maam-009563 is fabricated using a gaas hbt process to realize low cu rrent and high power functionality. the process features full passivation for increased performance and reliability. the maam-009563 has been designed to be a functional driver amplifier from 250 to 3000 mhz. this broad operation is achieved using external matching components as shown in the pcb layout. component values are selected to center the 200 mhz instantaneous bandwidth within the overall frequency range. ordering information 1,2 pin configuration 5 pin no. pin name description 1 v cc1 1st stage v cc & rf output 2 n/c no connection 3 n/c no connection 4 rf in amplifier input 5 rf out / v cc2 amplifier output & 2nd stage v cc 6 rf out / v cc2 amplifier output & 2nd stage v cc 7 n/c no connection 8 rf in2 2nd stage rf input functional block diagram * restrictions on hazardous substanc es, european union directive 2002/95/ec. absolute maximum ratings 3,4 maximum operating conditions 6 5. the exposed pad centered on the package bottom must be connected to the rf and dc ground. 6. these operating conditions will ensure mttf > 1 x 10 6 hours. 7. junction temperature (t j ) = t a + ? jc * ((v * i) - (p out - p in )) typical thermal resistance ( ? jc) = 20o c/w a) for t a = 25c, t j = 74 c @ 5 v, 535 ma, p out = 24 dbm, p in = 4.5 dbm b) for t a = 85c, t j = 123 c @ 5 v, 430 ma, p out = 24 dbm, p in = 5.5 dbm 3. exceeding any one or combination of these limits may cause permanent damage to this device. 4. m/a-com technology solutions does not recommend sustained operation near these survivability limits. parameter absolute maximum rf output power 32 dbm voltage 6 volts storage temperature -65c to +150c junction temperature 210c part number package MAAM-009563-000000 bulk maam-009563-tr3000 3000 piece reel maam-009563-001smb sample board parameter maximum operating conditions junction temperature 7 170c rf output power 31 dbm operating temperatur e -40c to +85c
2 rf driver amplifier 250 - 3000 mhz rev. v1 maam-009563 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. 2140 mhz pcb layout 2140 schematic parts list the pcb dielectric between rf traces and rf ground layers should be chosen to reduce rf discontinuities between 50 ? lines and package pins. m/a-com recommends an fr-4 dielectric thickness of 0.008? (0.20 mm) yielding a 50 ? line width of 0.015? (0.38 mm). the recommended rf metalization is 1 ounce copper. part value case style c1 1.8 pf 0402 c2, c5 1000 pf 0402 c3, c4 0.1 f 0402 c6 1.2 pf 0402 c7 39 pf 0402 c8 2.7 pf 0402 c9 3.3 f 1206 l1 2.4 nh 0402 l2 7.5 nh 0402 l3 8.2 nh 0402 r1 10 ? 0402 j1, j2 jumper cross section view electrical specifications : freq. = 2140 mhz, t a = 25c, v cc = +5 v, z 0 = 50 ? parameter units min. typ. max. gain db 17 19.5 ? noise figure db ? 6.25 ? input return loss db ? 13 ? output return loss db ? 13 ? output p1db dbm ? 31 ? output ip3 p in = -4 dbm / tone, 1 mhz spacing dbm 44 47 ? quiescent current ma ? 500 ? current (p in = -1 dbm) ma ? 510 640
3 rf driver amplifier 250 - 3000 mhz rev. v1 maam-009563 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves: 2140 mhz configuration input return loss output ip3 gain output return loss noise figure p1db 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 2.10 2.12 2.14 2.16 2.18 2.20 +25 c -40 c +85 c frequency (ghz) 20 30 40 50 60 4 6 8 101214161820222426 +25 c -40 c +85 c output power (dbm)/tone 10 15 20 25 30 4 6 8 10121416182022242628303234 +25 c -40 c +85 c output power (dbm) 10 15 20 25 30 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25 c -40 c +85 c frequency (ghz) -25 -20 -15 -10 -5 0 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz) -25 -20 -15 -10 -5 0 2.00 2.05 2.10 2.15 2.20 2.25 2.30 +25c -40c +85c frequency (ghz)
4 rf driver amplifier 250 - 3000 mhz rev. v1 maam-009563 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. lead-free soic-8ep? ? reference application note m538 for l ead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. plating is 100% matte tin over copper. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 2 devices. typical performance curves, 2140 mhz configuration current 0 100 200 300 400 500 600 700 800 900 4 6 8 10121416182022242628303234 +25 c -40 c +85 c output power (dbm)
|
